Diazolidinyl Urea IPBC combines Diazolidinyl Urea, which is one of the most effective antibacterial agents, and Iodopropynyl Butylcarbamate, which is a powerful antifungal preservative. The blend ratio provides for a strong, broad-spectrum protection against antimicrobial activity with a very low amount of preservative required. This system works over a wide pH range and does not affect the appearance of the final product and is an excellent alternative to parabens.

Ingramaben PD3 is a preservative system that is extremely powerful with a complete spectrum of antimicrobial activity. This product is globally approved in rinse off cosmetics. The combination of preservatives in Ingramaben PD3 reduces the amount of preservatives needed to effectively preserve against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds. It can be used in the pH range of 3-9, and is soluble in alcohol, propylene glycol, water and polar oils. It is slightly soluble in mineral oil.

Ingramaben PD2 is an antimicrobial preservative system with broad spectrum activity that is highly effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and mold. It is a clear, viscous liquid and is convenient and ready-to-use. It minimizes the problems associated with incorporating solid parabens. It does not change the appearance of cosmetics, and it can be used as a very cost effective preservative due to its low use level requirement. Ingramaben PD2 is compatible with anionic, cationic, and non-ionic cosmetic ingredients.

Ingragard BDA is permitted for use in natural and organic cosmetics in accordance with the Natural Certified Cosmetics organizations (COSMOS, Ecocert, BDIH and Soil association approved). Ingragard BDA is a gentle and effective preservative system based on nature-identical substances. Broad spectrum activity of anti bacterial Benzyl Alcohol and antifungal Dehydroacetic Acid particularly in aqueous applications such as oils and surfactants. It is very cost effective with higher efficacy and can be used in a wide range of cosmetics with slightly acidic pH. A cosmetic ingredient frequently used in skin care, decorative cosmetics, body care, baby care (baby wipes) and hair care products and raw materials.

Easily incorporated into a broad range of cosmetic formulations, Diazolidinyl Urea has a high efficacy against bacteria. It causes no changes in the appearance of the formula, is highly cost effective, and is highly effective against Gram-negative bacteria, Gram-positive bacteria, as well as molds, and a limited effect against yeasts. Stable and active in the pH range 3-9, Diazolidinyl Urea is an excellent preservative for many cosmetic applications. Diazolidinyl Urea is also available as a blend with Iodopropynyl Butylcarbamate and it's called Diazolidinyl Urea IPBC.

Ingrephen PCG45 is a colorless and odorless liquid preservative system that provides anti-microbial activity through phenoxyethanol and enhanced by a boosting effect through caprylyl glycol. Highly soluble in alcohol, glycerin and glycols, soluble in water up to 1% (and slightly soluble in oils), Ingrephen PCG45 is stable and active in the pH range of 3-8. Ingrephen PCG45 is permitted for use of up to 1.78% in nearly all cosmetic and personal care applications without restrictions on a global level.

Effective in a wide pH range from 3 to 8. Ingrephen PCG10 is a liquid preservative system based on Phenoxyethanol and enhanced by Caprylyl glycol for a preservative boosting effect. It is an excellent alternative to controversial preservatives as it meets current safety, efficacy and global approvals. It provides broad spectrum preservative activity against bacteria and yeasts. It is soluble in alcohol, glycerin and glycols, and water to approximately 2% (less soluble in oils). Ingrephen PCG10 can be used as a preservation system in a wide range of emulsions, anhydrous systems and aqueous cosmetics.

PDI Plus Liquid is highly effective against Gram-negative and Gram-positive bacteria, yeasts and molds and is stable and effective in the pH range of 3-9. A powerful, paraben-free preservative system, PDI Plus Liquid is easy to handle, does not change the appearance, odor or viscosity of the final cosmetic product and provides maximum antimicrobial activity at very low use levels. PDI Plus Liquid is very soluble in propylene glycol, soluble in water, slightly soluble in glycerin and ethanol and insoluble in mineral oil. It's compatible with most common personal care ingredients and works well in hair care, skin care, body care and decorative cosmetics formulations.

Effective in a broad pH range of 3-9, Phenoxyethanol IPBC is a powerful liquid preservative system that is suitable for a wide range of personal care products. This alternative to parabens is soluble in water, does not change odor and viscosity of formulations, and is highly effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds. Phenoxyethanol IPBC is very soluble in alcohols and glycols, and is soluble in water and polar oils. It is frequently used in rinse-off and leave-on products from foundations, skin serums, hair mousses to wet wipes.

Preservidant DPS is a preservative system that provides broad spectrum antimicrobial activity that can be used in a wide range of cosmetics in the pH range of 3-6. This system is recommended for difficult to preserve cosmetics. It provides strong, easy-to-work with properties and is effective at low use levels. Soluble in water, alcohol, glycols, and glycerin (not soluble in oils and non-polar solvents), Preservidant DPS can easily be incorporated into aqueous formulations, surfactant-based formulas and emulsions. It is highly effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds.

Preservidant IDP is a paraben free preservative system that is easy to work with and ensures effective coverage over a broad pH range of 3-9. Soluble in propylene glycol, glycerine, freely soluble in alcohol and soluble in water up to 3%, Preservidant IDP is effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds. This system is typically used for rinse off applications and due to its low use level is suitable for difficult-to-preserve cosmetics. With correct use, Preservidant IDP does not effect color, odor or viscosity of the finished product. It is a clear, colorless liquid with mild odor.

Betaine CP38 is around 25% more concentrated than typical grades of this material which makes it hostile to microbial growth, eliminating the need for a preservative. Betaine CP38 is a high active grade of cocamidopropyl betaine made from a low odour and low colour feedstock. It is stable and efficacious over a broad pH spectrum and is suitable for cationic and anionic surfactants, plus it is readily biodegradable. This self-preserving betaine is manufactured from hydrogenated coconut oil and is an amphoteric surfactant often used in applications like skin serums, skin/sun creams, skin toners, fabric detergents, and laundry detergents.

Ingrephen PCGS is a liquid preservative system that provides broad spectrum protection and enhanced fungi protection in a pH range of 3-6. It is based on widely accepted cosmetic preservatives Phenoxyethanol and Sorbic Acid and boosted by Caprylyl Glycol, which provides emollient properties and improves skin tolerability. The combination provides a gentle, reduced content alternative to traditional preservatives.

Natural Rose Water is a 100% pure and natural product from Bulgaria. The fresh rose petals from the Rosa Damascena are distilled and cohobated to give the water a total rose oil concentration of approximately 0.05%. Natural Rose Water has hydrating, disinfectant, antiviral and anti-inflammatory properties. It can be used in skin care products for all skin types. It is also suitable for other hair & skin care products, as well as in perfumes and in food products. Also available as organic product called Organic Rose Water.

Natural Rose Water - 06 is a 100% natural product. Double distillation of the fresh Bulgarian Rosa Damascena petals gives a rose oil concentration of approximately 0.06%. Rose water contains antioxidants and has anti-inflammatory & anti-bacterial properties. It's therefore commonly used in products used on the skin, from moisturizing creams to wound healing. Natural Rose Water - 06 is also used to add cleansing, perfuming, hydrating and refreshing properties to formulations.

Organic certified by Lacon, Organic Rose Water is a natural and organic product. The fresh rose petals from Rosa Damascena are picked from Bulgarian fields at the end of the season, followed by a distillation and cohobation process. Organic Rose Water hydrates the skin and has disinfectant and anti-inflammatory properties. It can be used in skin cleansing and other skin care products. It is suitable for hair care, perfumes and in food products. Also availabe as conventional grade called Natural Rose Water or Natural Rose Water - 06.

Based on Monosodium L-Glutamate (MSG), Glutamate TDA30 is a safe, readily biodegradable chelating and rinsing agent. It is made from vegetable materials in a biochemical process. It has an excellent solubility and is highly effective over a wide pH range. Glutamate TDA30 is also not sensitizing to human skin. All of these properties make Glutamate TDA30 a more effective and safer choice compared to phosphonates or phosphate based chelating and rinsing agents. The INCI name of this product is Tetrasodium Glutamate Diacetate and it's also known as a preservative booster.

Sodium Hyaluronate PC 10 is a natural moisturizing polymer. It has an average molecular weight of around 10,000 daltons. This medium molecular weight polymer offers excellent moisturizing and moisture retention. It also acts as a hydrating agent. Besides that, Sodium Hyaluronate PC 10 offers anti aging and even skin repair properties. It is commonly used in personal care products like skin and face creams, lotions, toners and (facial) masks. Sodium Hyaluronate is also available in lower and higher molecular weight, called respectively Sodium Hyaluronate PC 5 and Sodium Hyaluronate PC 1000.

Globally approved without restrictions for cosmetic applications, IngreCare BS provides a broad spectrum of antibacterial properties and high activity against yeasts and molds. Composed of nature-identical ingredients, IngreCare BS is suitable for natural and organic cosmetics and a wide variety of products with acid pH levels between 2 and 5.5. Soluble in water, glycerin and glycols (slightly soluble in alcohols), IngreCare BS is a balanced combination of sodium benzoate and potassium sorbate and is an increasingly popular preservative system.It’s a liquid yellowish to brownish blend of Potassium Sorbate and Sodium Benzoate preservatives and water (respectively ~15%, ~30% and ~55%), with a shelf life of 18 months in original packaging. It should be stored in tightly closed containers at temperature below 25oC and kept away from direct sunlight and protected from frost. IngreCare BS is recommended to be used to protect especially aqueous systems and emulsions against microbial growth at concentrations of 0.2-1.0% in personal care formulations with low risk of bacterial contamination. Cosmetic products with higher risk of bacterial contamination may need a different minimum level and combination with other preservatives.

Sodium Hyaluronate PC 1000 is a high molecular weight sodium hyaluronate polymer. Its molecular weight of 1,000,000 to 1,500,000 makes the skin very soft and glossy and reduces water loss from the skin. This makes Sodium Hyaluronate PC 1000 an excellent moisturizer. It also has excellent film forming and lubricating properties due to the high molecular weight. Sodium Hyaluronate PC 1000 can be used in many skin and face products like creams, lotions, toners and masks. Sodium hyaluronate is also available in lower molecular weight (Sodium Hyaluronate PC 5 and Sodium Hyaluronate PC 10).

Betaine CP30 is anamphoteric surfactant, manufactured from hydrogenated (hardened) coconut oil and is preserved with 0.3% sodium benzoate. It provides excellentviscosityfeatures and foam boosting characteristics to anionic based cleansers. It is commonly used inshampooformulations to improve conditioning effects for the hair and reduce static build up. Betaine CP30 is stable and efficacious over a broad pH spectrum and is suitable for cationic and anionic surfactants.

Sodium Hyaluronate PC 5 is a low molecular weight polymer of the natural moisturizer sodium hyaluronate. It has an average molecular weight of around 5,000 daltons. The low weight allows it to easily penetrate the skin, making it especially usable in face and skin care products. It improves cell (re)generation making it anti-aging. This, combined with Sodium Hyaluronate PC 5's excellent moisturizing properties makes this an excellent product to hydrate, moisturize and soften the skin and face. Sodium Hyaluronate is also available in higher molecular weight with 10.000 daltons, called Sodium Hyaluronate PC 10 or with 1.0-1.5 million daltons called Sodium Hyaluronate PC 1000.

Bakuchiol is a phenol-like substance which is derived from bakuchiol seeds, mainly from the Psoralea corylifolia plant. The powder is a bio-based powerful anti-oxidant with anti-aging, anti-acne and antibacterial properties. Bakuchiol finds its application mainly in decorative cosmetics and skin care, and primarily in creams, oils and emulsions. The effects are similar to those of retinol (vitamin A), however in light conditions, stability of bakuchiol is even better. Due to lower risk of skin irritation, Bakuchiol is a good alternative for all skin types, especially sensitive skin. It has a shelf life of 36 months.

Based on nature-identical ingredients, Ingrephen BWPS is globally approved for a wide range of cosmetics with acidic pH and is recommended for use within a pH range from 3.3 to 5.5. It combines the antibacterial properties of Benzyl alcohol with Potassium sorbate and Sodium benzoate for antifungal activity. Ingrephen BWPS is soluble in water, and glycerin and glycols (slightly soluble in alcohols). Effective against Gram-negative bacteria and Gram-positive bacteria as well as yeasts and molds, this system is gentle on the skin and is allowed for use in natural and organic cosmetics.