IngrePol PEG-100GM has a flakey, white appearance and acts as a supplemental emulsifier. It also modifies viscosity and improves stability of the emulsion. The key advantage of IngrePol PEG-100GM is that it acts very well as a balancing emulsifier system and has a wide range pH tolerance. IngrePol PEG-100GM is applicable in a wide range of fields, such as baby care, color cosmetics (blushes and eye shadows), skin care (skin/sun creams and shaving creams), hair care and sun care.

Glyceryl Stearate SE is an anionic self-emulsifying base that is widely used in a large range of various cosmetic applications such as eye creams, sunscreens, eye shadows, hair care and lotions. This material performs as a thickener and as a stabilizer. It is also soluble in oil and has a non distinctive odor. Glyceryl Stearate SE is often recommended as a co-emulsifier.

Ingresil D5 is a clear, colorless and volatile polydimethylcyclosiloxane widely used as a base fluid in a wide variety of formulations. Providing excellent spreading properties and enhancing glide, this emollient provides a smooth, non-greasy feeling to the skin. Compatible with a wide range of cosmetic ingredients, Ingresil D5 can be used in skin care products, make-up (eye shadows & mascaras), antiperspirants and hair serums and conditioners.

Diazolidinyl Urea IPBC combines Diazolidinyl Urea, which is one of the most effective antibacterial agents, and Iodopropynyl Butylcarbamate, which is a powerful antifungal preservative. The blend ratio provides for a strong, broad-spectrum protection against antimicrobial activity with a very low amount of preservative required. This system works over a wide pH range and does not affect the appearance of the final product and is an excellent alternative to parabens.

Easily incorporated into a broad range of cosmetic formulations, Diazolidinyl Urea has a high efficacy against bacteria. It causes no changes in the appearance of the formula, is highly cost effective, and is highly effective against Gram-negative bacteria, Gram-positive bacteria, as well as molds, and a limited effect against yeasts. Stable and active in the pH range 3-9, Diazolidinyl Urea is an excellent preservative for many cosmetic applications. Diazolidinyl Urea is also available as a blend with Iodopropynyl Butylcarbamate and it's called Diazolidinyl Urea IPBC.

Broadly used within the cosmetic market as a suitable alternative to other preservation system, IngreCare PE suits the need of claims for safety, efficacy and global approval. Highly soluble in alcohol, glycerin and glycols (soluble in water to approximately 1%) and soluble in oils, IngreCare PE is stable and fully effective in pH ranges of 3-12. Stable to discoloration and compatible with a wide range of raw materials, this liquid preservative is based on Phenoxyethanol and is boosted by the multifunctional ingredient Ethylhexylglycerin. With its broad range of capabilities, IngreCare PE is used for the preservation of anhydrous systems, emulsions and aqueous systems while at the same time improving skin feel of the final product.

Ingrephen PCG45 is a colorless and odorless liquid preservative system that provides anti-microbial activity through phenoxyethanol and enhanced by a boosting effect through caprylyl glycol. Highly soluble in alcohol, glycerin and glycols, soluble in water up to 1% (and slightly soluble in oils), Ingrephen PCG45 is stable and active in the pH range of 3-8. Ingrephen PCG45 is permitted for use of up to 1.78% in nearly all cosmetic and personal care applications without restrictions on a global level.

Effective in a wide pH range from 3 to 8. Ingrephen PCG10 is a liquid preservative system based on Phenoxyethanol and enhanced by Caprylyl glycol for a preservative boosting effect. It is an excellent alternative to controversial preservatives as it meets current safety, efficacy and global approvals. It provides broad spectrum preservative activity against bacteria and yeasts. It is soluble in alcohol, glycerin and glycols, and water to approximately 2% (less soluble in oils). Ingrephen PCG10 can be used as a preservation system in a wide range of emulsions, anhydrous systems and aqueous cosmetics.

PDI Plus Liquid is highly effective against Gram-negative and Gram-positive bacteria, yeasts and molds and is stable and effective in the pH range of 3-9. A powerful, paraben-free preservative system, PDI Plus Liquid is easy to handle, does not change the appearance, odor or viscosity of the final cosmetic product and provides maximum antimicrobial activity at very low use levels. PDI Plus Liquid is very soluble in propylene glycol, soluble in water, slightly soluble in glycerin and ethanol and insoluble in mineral oil. It's compatible with most common personal care ingredients and works well in hair care, skin care, body care and decorative cosmetics formulations.

Preservidant IDP is a paraben free preservative system that is easy to work with and ensures effective coverage over a broad pH range of 3-9. Soluble in propylene glycol, glycerine, freely soluble in alcohol and soluble in water up to 3%, Preservidant IDP is effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds. This system is typically used for rinse off applications and due to its low use level is suitable for difficult-to-preserve cosmetics. With correct use, Preservidant IDP does not effect color, odor or viscosity of the finished product. It is a clear, colorless liquid with mild odor.

Preservidant L Plus is a clear, colorless viscous liquid preservative system that is powerful, paraben-free, and will not affect the color, odor or viscosity of the finished product. Both easy to work with and effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds, Preservidant L Plus can be used in the wide pH range of 3 to 10. It is soluble in alcohol, glycols, slightly soluble in water (not soluble in oil). It is globally approved in rinse-off products and can be used in aqueous & hydro-alcoholic systems, surfactant-based products, emulsions and anhydrous products.

Ingrephen PCGS is a liquid preservative system that provides broad spectrum protection and enhanced fungi protection in a pH range of 3-6. It is based on widely accepted cosmetic preservatives Phenoxyethanol and Sorbic Acid and boosted by Caprylyl Glycol, which provides emollient properties and improves skin tolerability. The combination provides a gentle, reduced content alternative to traditional preservatives.

PVP K90W (20% PVP in water) is a hair care polymer of 1-vinyl-2-pyrrolidone monomers. This ingredient primarily acts as fixative, conditioning polymer and film former. PVP K90W provides good curl retention and hold even in high humidity. It's used in hair mousses, hair gels, hair conditioners and lotions and in addition as dispersant for hair colorants and in skin care and decorative cosmetic applications.

PVP K30W is a 40% aqueous solution of PolyVinyl Pyrrolidone, which is a hygroscopic amorphous polymer used in a wide range of applications from coatings and adhesives to fibers and textiles. IngreCore’s PVP K30W is mainly used in personal care formulations and works very well in hair products because of its outstanding conditioning and film forming properties. It can be used in hair styling formulations to provide good curl retention or as as a dispersant for hair dyes. In addition, it’s a good ingredient for eye, skin and anti-aging creams and numerous make-up products.

IngreSil BDM-960 is a high molecular weight silicone resin dispersed in polymethylsilsesquioxane. It is frequently used in decorative cosmetics because of its excellent smoothness and skin feel, as well as the velvet look it imparts. It is also popular because of its film forming capabilities, the film provides excellent water resistance and reduces pigment migration. Additionally, IngreSil BDM-960 acts as a rheology modifier, emulsifier and stabilizer. It's most commonly used in lipsticks and glosses, skin/sun creams and lotions, foundations, shampoos, hair conditioners and many more.

IngreSil BDMCP-805 is a highly concentrated silicone elastomer gel. It acts as an emulsifier and silicone surfactant, both these properties contribute to IngreSil BDMCP-805 having great conditioning characteristics. It is mainly used in Skin & Body Care products like skin moisturizer, skin/sun creams and lotions, body wash, body lotions but it is also used in Hair Care products like conditioners and shampoos. In all of these applications, IngreSil BDMCP-805 provides a smooth, soft, non-tacky feel. It also has the added benefit of being oil controlling and viscosity reducing.

IngreSil BD5-910 is a silicone elastomer in gel form. It's an ultra high molecular weight crosslinked silicone copolymer dispersion in Cyclopentasiloxane. It is frequently used in decorative cosmetics as it is velvety smooth and gives a matte, powdery appearance, allowing it to cover tiny wrinkles and skin imperfections. This ingredient has some cleansing properties, making it a useful additive in skin care products. IngreSil BD5-910 also improves skin affinity of make up products and it increases the longevity of color cosmetics. It's easy to (cold) formulate and imparts a non-tacky feel to the formulation.

IngreSil ALDM-470 is a silicone polymer wax with long alkane carbon chains. The long carbon chains make for excellent moisturizing and lubricating properties while also keeping the product usable in a wide range of applications. In Skin Care, IngreSil ALDM-470 is mostly used in skin moisturizers and skin and sun creams because it can make the skin feel soft and smooth without being tacky. In addition this ingredient is used in antiperspirants and deodorants and also widely used in decorative cosmetics like lipsticks and glosses. IngreSil ALDM-470 excels in bar products, like lipsticks, where it greatly improves performance by reducing pigment migration and making it easier to tint.

IngreSil BDM-926 is a high molecular weight silicone copolymer dispersion in nonvolatile dimethicone. It boasts great long-lasting film forming properties, making it ideal for Decorative Cosmetics and Skin Care applications. IngreSil BDM-926 imparts a soft, smooth velvet like skinfeel, this in combination with its moisturizing and softening properties, makes it ideal for many products like skin moisturizers, skin and sun creams and lotions, body lotions and many more. In Decorative Cosmetics it leaves a matt, powdery look that can cover tiny skin blemishes. It also provides a water resistance, making it ideal in lipsticks and glosses and cosmetics in powder form.

Octyldodecanol is a transparent, odorless fatty alcohol. It is compatible for personal care products, where a wide range of pH is required. A medium spreading emollient. Octyldodecanol is a very common base within the formulation of emollient esters. It has very good penetration features with high stability levels, making it appropriate for deodorants, decorative cosmetics and skin care products. This material also has strong solvent, humectant and gloss enhancing features.

Ingrephen PCG35 is a broad spectrum preservative system that is active against bacteria, yeasts and molds. Very soluble in alcohol, glycerin and glycols, Ingrephen PCG35 is soluble in water up to 1.5% (less soluble in oils). Ingrephen PCG35 is a liquid system effective in wide pH ranges from 3 to 9, and has no impact on the odor or color of the end formulation. It is a gentle and effective alternative to traditional preservatives. Based on phenoxyethanol, and enhanced by caprylyl glycol, Ingrephen PCG 35 is a liquid blend providing both emollient and preserving boosting effects for personal care applications.

Glyceryl Glucoside 47 is a multifunctional ingredient, suitable for all skin types even for allergic and sensitive skin. It helps to improve many skin processes from providing moisture, enhancing the skin barrier to better skin elasticity. Glyceryl Glucoside is naturally occurring in fermented products and is an outstanding moisturizer. It can be applied in a wide range of sun care, skin are and decorative cosmetics applications. Recommended use levels from 0.4-2.0% and it can be formulated directly in the aqueous phase.