Preservidant IDP is a paraben free preservative system that is easy to work with and ensures effective coverage over a broad pH range of 3-9. Soluble in propylene glycol, glycerine, freely soluble in alcohol and soluble in water up to 3%, Preservidant IDP is effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds. This system is typically used for rinse off applications and due to its low use level is suitable for difficult-to-preserve cosmetics. With correct use, Preservidant IDP does not effect color, odor or viscosity of the finished product. It is a clear, colorless liquid with mild odor.

Preservidant L Plus is a clear, colorless viscous liquid preservative system that is powerful, paraben-free, and will not affect the color, odor or viscosity of the finished product. Both easy to work with and effective against Gram-negative bacteria, Gram-positive bacteria, yeasts and molds, Preservidant L Plus can be used in the wide pH range of 3 to 10. It is soluble in alcohol, glycols, slightly soluble in water (not soluble in oil). It is globally approved in rinse-off products and can be used in aqueous & hydro-alcoholic systems, surfactant-based products, emulsions and anhydrous products.

One of the most widely used preservatives for topical pharmaceutical products as well as cosmetics, Imidazolidinyl Urea is easy to work with and causes no changes in the appearance of products. A low cost, low use preservative, Imidazolidinyl Urea is also known as Imidurea NF. With high efficacy against bacteria, it is highly effective against Gram-negative and Gram-positive bacteria.

Ingrephen PCGS is a liquid preservative system that provides broad spectrum protection and enhanced fungi protection in a pH range of 3-6. It is based on widely accepted cosmetic preservatives Phenoxyethanol and Sorbic Acid and boosted by Caprylyl Glycol, which provides emollient properties and improves skin tolerability. The combination provides a gentle, reduced content alternative to traditional preservatives.

PVP K30W is a 40% aqueous solution of PolyVinyl Pyrrolidone, which is a hygroscopic amorphous polymer used in a wide range of applications from coatings and adhesives to fibers and textiles. IngreCore’s PVP K30W is mainly used in personal care formulations and works very well in hair products because of its outstanding conditioning and film forming properties. It can be used in hair styling formulations to provide good curl retention or as as a dispersant for hair dyes. In addition, it’s a good ingredient for eye, skin and anti-aging creams and numerous make-up products.

PVP K90W (20% PVP in water) is a hair care polymer of 1-vinyl-2-pyrrolidone monomers. This ingredient primarily acts as fixative, conditioning polymer and film former. PVP K90W provides good curl retention and hold even in high humidity. It's used in hair mousses, hair gels, hair conditioners and lotions and in addition as dispersant for hair colorants and in skin care and decorative cosmetic applications.

IngrePol PEG-1500S is a polymer of ethylene oxide in wax-like flakes, with an average molecular weight of 1500. Like all polyethylene glycol surfactants it has good hydroscopic properties. In addition it's an effective non volatile solvent due to its high boiling point and compatible with most organic solvents. IngrePol PEG-1500S is a multifunctional ingredient in numerous personal care and cleaning applications, for example as wetting agent for body cleansers, as moisturizer in antiperspirants, as binder for laundry and dishwashing tabs and can be used in ointments and bath oils, to mention a few applications.

IngreSil PEG-10DM-215 is an excellent silicone emulsifier with low viscosity. It is often used to formulate highly stable W/O emulsions and creams. Besides stabilizing and emulsifying, IngreSil PEG-10DM-215 also adds a smooth, light skin feel. It is easy to formulate and highly flexible in its use cases. It is also a great additive to disperse powders in both polar and silicone oil formulations. IngreSil PEG-10DM-215 is used in a wide range of Skin Care and Decorative cosmetic products, from skin/sun creams and lotions to a wide variety of make up products like foundations. It is also commonly used in antiperspirants and skin moisturizers.

IngreSil BDM-960 is a high molecular weight silicone resin dispersed in polymethylsilsesquioxane. It is frequently used in decorative cosmetics because of its excellent smoothness and skin feel, as well as the velvet look it imparts. It is also popular because of its film forming capabilities, the film provides excellent water resistance and reduces pigment migration. Additionally, IngreSil BDM-960 acts as a rheology modifier, emulsifier and stabilizer. It's most commonly used in lipsticks and glosses, skin/sun creams and lotions, foundations, shampoos, hair conditioners and many more.

IngreSil BD5-910 is a silicone elastomer in gel form. It's an ultra high molecular weight crosslinked silicone copolymer dispersion in Cyclopentasiloxane. It is frequently used in decorative cosmetics as it is velvety smooth and gives a matte, powdery appearance, allowing it to cover tiny wrinkles and skin imperfections. This ingredient has some cleansing properties, making it a useful additive in skin care products. IngreSil BD5-910 also improves skin affinity of make up products and it increases the longevity of color cosmetics. It's easy to (cold) formulate and imparts a non-tacky feel to the formulation.

IngreSil BDM-926 is a high molecular weight silicone copolymer dispersion in nonvolatile dimethicone. It boasts great long-lasting film forming properties, making it ideal for Decorative Cosmetics and Skin Care applications. IngreSil BDM-926 imparts a soft, smooth velvet like skinfeel, this in combination with its moisturizing and softening properties, makes it ideal for many products like skin moisturizers, skin and sun creams and lotions, body lotions and many more. In Decorative Cosmetics it leaves a matt, powdery look that can cover tiny skin blemishes. It also provides a water resistance, making it ideal in lipsticks and glosses and cosmetics in powder form.

IngreSil TMS-122 is a high molecular weight silicone resin powder. It is an excellent polymer film former, providing a soft film, that improves durability in a wide range of Skin care and Decorative Cosmetic applications. IngreSil TMS-122 is an ideal additive for Decorative Cosmetics and colored make-up products because it provides great stability to color pigments. It's commonly used in products like skin and sun creams and lotions, antiperspirants, lipsticks&glosses, foundations, eye liners and many more Skin Care products.

Epsilon Polylysine is a polymer consisting of 25-40 repeats of the essential amino acid Lysine. It's commonly used as a natural preservative in personal care products. It offers broad-spectrum protection against microbes, but it can also be compounded with other preservatives. Upon degradation, it falls apart into Lysine, making it a nutritional preservative. Epsilon Polylysine is easy to use and applicable in a wide range of applications and formulations.

Polyglutamic Acid (PGA) is often compared with Hyaluronic Acid (HA) and both have impressive hydrating qualities. PGA is known for its stronger long lasting moisturizing properties and it can help to reduce the stickyness of hyaluronic acid. In addition Polyglutamic Acid 92 enhances skin elasticity and forms a smooth flexible film on the skin, which helps to prevent loss of water by trapping and sealing in moisture and is said to help against pollution. It's not only a great ingredient for skin care applications, but also improves the hair tensile strength and helps to reduce hair damage caused by hydrogen peroxides and other bleaching products.

Based on Monosodium L-Glutamate (MSG), Glutamate TDA30 is a safe, readily biodegradable chelating and rinsing agent. It is made from vegetable materials in a biochemical process. It has an excellent solubility and is highly effective over a wide pH range. Glutamate TDA30 is also not sensitizing to human skin. All of these properties make Glutamate TDA30 a more effective and safer choice compared to phosphonates or phosphate based chelating and rinsing agents. The INCI name of this product is Tetrasodium Glutamate Diacetate and it's also known as a preservative booster.

Globally approved without restrictions for cosmetic applications, IngreCare BS provides a broad spectrum of antibacterial properties and high activity against yeasts and molds. Composed of nature-identical ingredients, IngreCare BS is suitable for natural and organic cosmetics and a wide variety of products with acid pH levels between 2 and 5.5. Soluble in water, glycerin and glycols (slightly soluble in alcohols), IngreCare BS is a balanced combination of sodium benzoate and potassium sorbate and is an increasingly popular preservative system.It’s a liquid yellowish to brownish blend of Potassium Sorbate and Sodium Benzoate preservatives and water (respectively ~15%, ~30% and ~55%), with a shelf life of 18 months in original packaging. It should be stored in tightly closed containers at temperature below 25oC and kept away from direct sunlight and protected from frost. IngreCare BS is recommended to be used to protect especially aqueous systems and emulsions against microbial growth at concentrations of 0.2-1.0% in personal care formulations with low risk of bacterial contamination. Cosmetic products with higher risk of bacterial contamination may need a different minimum level and combination with other preservatives.

What is C12 15 Alkyl Benzoate – the chemical name of C12-15 Alkyl Benzoate is benzoic acid and C12-15 alkyl esters. It’s a clear, low-viscosity liquid and belongs to the group of personal care esters, featuring a lower molecular weight than other esters. Alkyl Benzoate is the benzoic ester of C12-15 fatty alcohols with carbon chain lengths ranging from 12-15. It’s a commonly used synthetic ingredient with a proven track record in cosmetic products.This emollient acts as a wetting and dispersing agent while being highly spreadable. It is a very common component for sunscreens and decorative cosmetics due to its ability to disperse UV filters and pigments. In addition C12-15 Alkyl Benzoate is used in a variety of skin care, body care, hair care and decorative cosmetic formulations. In cosmetic ingredient review C12 15 alkyl benzoate in skin care, functions as a popular non-oily emollient and skin conditioning agent. The recommended use levels range from 1-5%. The shelf life is 24 months after the date of manufacture. Store product in original, tightly sealed containers, in a cool, dry, and well-ventilated environment. Ensure containers are stored below 30°C. Product has pour point lower than -20°C and can thus be safely stored at around 0°C.

Octyldodecanol is a transparent, odorless fatty alcohol. It is compatible for personal care products, where a wide range of pH is required. A medium spreading emollient. Octyldodecanol is a very common base within the formulation of emollient esters. It has very good penetration features with high stability levels, making it appropriate for deodorants, decorative cosmetics and skin care products. This material also has strong solvent, humectant and gloss enhancing features.

Based on nature-identical ingredients, Ingrephen BWPS is globally approved for a wide range of cosmetics with acidic pH and is recommended for use within a pH range from 3.3 to 5.5. It combines the antibacterial properties of Benzyl alcohol with Potassium sorbate and Sodium benzoate for antifungal activity. Ingrephen BWPS is soluble in water, and glycerin and glycols (slightly soluble in alcohols). Effective against Gram-negative bacteria and Gram-positive bacteria as well as yeasts and molds, this system is gentle on the skin and is allowed for use in natural and organic cosmetics.

Ingrephen PCG35 is a broad spectrum preservative system that is active against bacteria, yeasts and molds. Very soluble in alcohol, glycerin and glycols, Ingrephen PCG35 is soluble in water up to 1.5% (less soluble in oils). Ingrephen PCG35 is a liquid system effective in wide pH ranges from 3 to 9, and has no impact on the odor or color of the end formulation. It is a gentle and effective alternative to traditional preservatives. Based on phenoxyethanol, and enhanced by caprylyl glycol, Ingrephen PCG 35 is a liquid blend providing both emollient and preserving boosting effects for personal care applications.

Glyceryl Glucoside 47 is a multifunctional ingredient, suitable for all skin types even for allergic and sensitive skin. It helps to improve many skin processes from providing moisture, enhancing the skin barrier to better skin elasticity. Glyceryl Glucoside is naturally occurring in fermented products and is an outstanding moisturizer. It can be applied in a wide range of sun care, skin are and decorative cosmetics applications. Recommended use levels from 0.4-2.0% and it can be formulated directly in the aqueous phase.